Total
RE8040-BLN440
The low pressure reverse osmosis membrane CSM RE 8040-BLN 440 is used in filtration of brackish water in any reverse osmotic systems.
Description ...
Description ...
Price on request
Membrane CSM RE 8040-BLN 440. The membrane element is a thin, porous layer of a special high-tech fabric rolled into a spiral that prevents certain ions from penetrating through it. Due to its ability to remove ions from liquids, it is mainly used to remove salt from aqueous solutions.
Reverse osmosis membrane CSM.
The diameter of the membranes varies from 2.5 to 16 inches. Reduced duct thickness is a guarantee of excellent hydraulic performance. High cleaning ability is achieved due to the minimum size of filtration pores - 1 angstroms.
The result is an ultra-fine purification and water at the outlet, close in quality to distilled one. The assortment of membranes - models for industrial and home use. Despite the small diameter of the channel, the increase in resistance when it is polluted is excluded, and the durability is ensured.
CSM reverse osmosis membranes are divided into the following types:
The diameter of the membranes varies from 2.5 to 16 inches. Reduced duct thickness is a guarantee of excellent hydraulic performance. High cleaning ability is achieved due to the minimum size of filtration pores - 1 angstroms.
The result is an ultra-fine purification and water at the outlet, close in quality to distilled one. The assortment of membranes - models for industrial and home use. Despite the small diameter of the channel, the increase in resistance when it is polluted is excluded, and the durability is ensured.
CSM reverse osmosis membranes are divided into the following types:
- For brackish water;
- Resistant to dirt;
- For salt water;
- Resistant to chlorine;
- For the production of ultrapure water.
Filtration area reaches 37.2 square meters, performance - from 1.2 to 37.5 l / day. The increased chemical resistance of the membranes allows their use after cleaning without loss of performance. A wide range of operating temperatures (2 - 45 ° C) makes nanofilters versatile - they can be used for technical, industrial, drinking water supply.
.png)
Technical characteristics:
Technical characteristics:
- Working pressure - 10 atm;
- Productivity - 13,0 m3 / day;
- Selectivity - 99,6%;
- The area of the filtering surface - 4,4 m2.
Description:
- Membrane type - Thin-film composite;
- The membrane material is PA (Polyamide);
- The surface charge of the membrane is Negative;
- Construction - Rolled membrane with FRP sheath (fiberglass).
Dimensions:
- The length is 1016 mm;
- Outer diameter - 102 mm;
- The diameter of the output tube - 19,1 mm.
