Ecosoft Scalex FOSE100ECO - for washing machines and dishwashers

This innovative filter, based on the unique SCALEX inhibitor for washing machines and dishwashers, prevents scale and hardness buildup, removes limescale, regulates water hardness, and uses only the amount of filter media needed to prevent scale buildup. This filter improves washing efficiency and reduces energy consumption by 30%.

Capacity: 20,000 liters or 400 wash cycles
Dimensions: 130 x 85 mm

This filter is designed for use with cold tap water only. For best results, vertical installation is recommended. Before first use, rinse the filter with water for 2-5 minutes to remove any residual particles and impurities that may have accumulated during the manufacturing process. It is recommended to change the filter media at least every 6 months.
more information

100 000 UZS
Ecosoft FOSE100ECO datasheet.pdf
 

Instructions for Replacing the Ecosoft Scalex Anti-Scale Filter Media:

  1. Shut off the water supply to the filter and make sure there is no pressure on the housing.
  2. Unscrew the filter housing from the lid.
  3. Remove the top mesh covering the filter media.
  4. Remove the used media from the housing and rinse the housing to clear any remaining particles.
  5. Add the new media from the container. One container is enough for two replacements.
  6. Place the mesh back on the filter housing and screw it onto the filter lid.
  7. Open the water supply to the filter.
  8. The filter is ready for use.