Ecosoft - FPV12HWECO
Heat-resistant filter housing resistant to high temperatures - up to 80°C, for cleaning hot water from large impurities over 5 microns.
Productivity: up to 10 l/min
Dimensions: 12 × 32 cm
more information
Productivity: up to 10 l/min
Dimensions: 12 × 32 cm
more information
240 000 UZS
The main filter is designed to clean hot water from large impurities, more than 5 microns, effectively removes sand, silt, rust, scale and other mechanical impurities. A special feature of the model is the ability to work at high temperatures - up to 80 degrees.
The filter is connected to the water supply using metal-plastic pipes. The service life depends on the degree of contamination and the amount of filtered water, replacement is recommended every 2-6 months.
After the end of the resource and service life, the cartridge must be replaced with a new one - unscrew the flask using a special key, remove the old cartridge, rinse the filter flask under running water and insert a new cartridge. Screw the housing with the cartridge to the filter cover until it stops.
Specifications
Cartridge type: 2.5"×10"
Connection diameter: 1/2''
Dimensions: 12 × 32 cm
Maximum capacity: 10 l/min
Working pressure: 3.5–4 bar
Working temperature: 3 – 80°C