AKV TYTAN-50
A compact reverse osmosis system, the most popular solution for families of 2-4. It operates entirely on tap water pressure, requires no electricity, and has a built-in 5-liter purified water storage tank. The system removes all harmful impurities from tap water of any quality, making it healthy. During the mineralization stage, it enriches the water with natural magnesium in an optimal concentration. This high-performance system is suitable for both domestic and commercial use.
Flow rate: up to 7 l/h - 50 GPD
Dimensions: 362 x 415 x 190 mm
Min. operating pressure: 2.5 bar
more information
Flow rate: up to 7 l/h - 50 GPD
Dimensions: 362 x 415 x 190 mm
Min. operating pressure: 2.5 bar
more information
2 000 000 UZS
Compact and economical RO system purifies water in 4 stages, delivering the highest quality purification, right down to bottled water quality. Regardless of the incoming water quality, the filter removes all impurities, including chlorine, hardness salts, nitrates, heavy metals, bacteria, and viruses. In the final stage, it infuses the water with calcium, magnesium, and potassium.
The system takes up minimal space under the sink and operates even at low water pressure. Producing up to 190 liters per day, it's the ideal solution for a family of 2-4. Important: Actual performance may vary depending on inlet pressure, temperature, and source water quality. Conveniently labeled replaceable modules simplify replacement, requiring no tools or specialist assistance. Auto Lock technology prevents leaks.
FILTRATION STAGES
The AKV A1-PP polypropylene-based cartridge provides mechanical filtration down to 5 microns, extending the life of subsequent cartridges. Replacement is required every 3-6 months (depending on the initial water quality).
The AKV A2-CB module, based on activated coconut carbon, provides pre-filtration down to 3 microns, effectively adsorbs residual chlorine, organic compounds, odors, and tastes, removes organic matter, and protects the membrane from oxidation. Replacement is required every 3-6 months (depending on the initial water quality).
The AKV RO-50 module, based on a low-pressure semi-permeable reverse osmosis membrane, provides ultra-deep water purification down to 0.0001 microns. It removes heavy metals, bacteria, and viruses up to 99%, purifying water to bottled quality. Replacement is required every 18-24 months (depending on the initial water quality).
The AKV A4-M module, based on pressed activated carbon enriched with strontium and mineralizer granules, enhances filtration properties and enriches water with calcium, magnesium, and potassium, leaving water fresh and soft, while effectively removing fluoride and heavy metals. Replacement is required every 6-12 months (depending on the initial water quality).
Specifications
Maximum capacity: 190 l/d – 50 GPD
Dimensions (Length x Height x Width): 362 х 415 х 190 mm
Operating temperature: +5 - +38 °C
Minimum operating pressure: 2.5 bar
Maximum operating pressure: 6.3 bar
Ph range: < 10 / > 4
Iron: no more than 0.3 ppm
TDS: ≤ 2000 ppm
Turbidity: ≤ 1 NTU
Water hardness: up to 350 ppm
Weight: 7 kg
The AKV A2-CB module, based on activated coconut carbon, provides pre-filtration down to 3 microns, effectively adsorbs residual chlorine, organic compounds, odors, and tastes, removes organic matter, and protects the membrane from oxidation. Replacement is required every 3-6 months (depending on the initial water quality).
The AKV RO-50 module, based on a low-pressure semi-permeable reverse osmosis membrane, provides ultra-deep water purification down to 0.0001 microns. It removes heavy metals, bacteria, and viruses up to 99%, purifying water to bottled quality. Replacement is required every 18-24 months (depending on the initial water quality).
The AKV A4-M module, based on pressed activated carbon enriched with strontium and mineralizer granules, enhances filtration properties and enriches water with calcium, magnesium, and potassium, leaving water fresh and soft, while effectively removing fluoride and heavy metals. Replacement is required every 6-12 months (depending on the initial water quality).
Specifications
Maximum capacity: 190 l/d – 50 GPD
Dimensions (Length x Height x Width): 362 х 415 х 190 mm
Operating temperature: +5 - +38 °C
Minimum operating pressure: 2.5 bar
Maximum operating pressure: 6.3 bar
Ph range: < 10 / > 4
Iron: no more than 0.3 ppm
TDS: ≤ 2000 ppm
Turbidity: ≤ 1 NTU
Water hardness: up to 350 ppm
Weight: 7 kg